Home Products Download Order Contacts

adobe.photoshop.camera.raw

Subject: Re: raw 3.1 professional custom profiles for highend digital cameras



Johnny,

For film that is the way it should work, but digital cameras respond differently and you should determine the proper amount to open up by tests. Meter from your 18% card and bracket upward by 0.3 EV increments until you reach the desired value after converting from raw with ACR.

On my own camera (Nikon D70) I confirmed that the response was linear and I had to open up by a about the above amount. The ANSI standard for meter calibration is for an equivalent to 12% (not 18%) reflectance, which requires another +0.5EV if you are using an 18% card. See my earlier post for details.

I suspect that it is the film-pater combination that is non-linear.

Reply


View All Messages in adobe.photoshop.camera.raw

path:
raw 3.1 professional custom profiles for highend digital cameras =>

Replies:

Copyright 2006 WatermarkFactory.com. All Rights Reserved.