Subject: Re: raw 3.1 professional custom profiles for highend digital cameras
Setting aside the notion of response differences (actually a calibration issue) I would first check the meter against a known, accurate reflected light meter, or if tour meter does both, against itself in both modes. Use an 18% card that's clean for the reflected reading.
The circuitry for flash is different than for continuous reading.
You did have the meter on continuous and not strobe, didn't you? ;-)
(Been there, done that!)
View All Messages in adobe.photoshop.camera.raw
raw 3.1 professional custom profiles for highend digital cameras =>
Copyright © 2006 WatermarkFactory.com. All Rights Reserved.